The SMALLRIG Universal Phone Holder Mount review is for creators who want to add a phone to a camera or tripod rig and adjust its orientation without changing mounts.
Its 57–88 mm grip range, two rotating joints, and cold shoe make it a versatile option for filming, interviews, and live streams.
SMALLRIG 4382 Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera and tripod phone clamp for creators who want portrait or landscape framing plus a cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide; check the phone's width with its case attached.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
Pros
- Supports both threaded and cold shoe mounting at the base.
- Portrait and landscape changes are built into the holder, with a 90-degree lock position.
Consider before buying
- The 57–88 mm fit range means buyers should verify phone width with the case they plan to use.
- The 500 g load limit requires checking the combined weight of the phone and any mounted accessories.
Read the full review summary
The 4382 combines a phone clamp with a mounting base that fits a camera or tripod through a 1/4-inch-20 threaded hole or cold shoe.
Once attached, its joints support up to 180 degrees of adjustment, while a 90-degree rotation lets you switch between landscape and portrait and lock the position.
A top cold shoe provides a place for a microphone or light, and additional threaded holes are designed for power bank holders.
This setup makes the most sense for mobile creators who already use camera or tripod gear and want one mount to handle different framing needs.
The clamp accepts phones 57–88 mm wide, but buyers should measure the phone with its case fitted.
The stated 500 g load capacity is a design limit to keep in mind when building out the rig; the package includes the phone holder only.
The buying factors
SMALLRIG 4382 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
A 1/4-inch-20 thread and a cold shoe at the base support two common ways to attach the holder to a rig.
Orientation changes
The holder rotates between portrait and landscape, with a lock at 90 degrees.
Angle adjustment
Two rotary joints provide up to 180 degrees of adjustment for framing.
Accessory expansion
A top cold shoe and spaced threaded holes accommodate a light or microphone and designated power bank holders.
Phone fit range
The 57–88 mm width range covers many phones, though buyers need to check their device width with its case.
Load headroom
The 500 g maximum offers a clear limit, so heavier phones or added accessories call for careful weight checking.
Key Features and Specifications of SMALLRIG 4382
- Fits smartphones 57–88 mm wide; check the phone's width with its case attached.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Top cold shoe accepts a microphone or light; threaded holes are designed for compatible SMALLRIG power bank holders.
- Maximum load capacity is 500 g. The package includes one phone holder.
Pros and Cons of SMALLRIG 4382
Pros
- Supports both threaded and cold shoe mounting at the base.
- Portrait and landscape changes are built into the holder, with a 90-degree lock position.
- Two rotary joints help position the phone for varied camera angles.
- A top cold shoe and threaded accessory points offer room to expand a compact rig.
Consider before buying
- The 57–88 mm fit range means buyers should verify phone width with the case they plan to use.
- The 500 g load limit requires checking the combined weight of the phone and any mounted accessories.
- Only the phone holder is included, so compatible camera, tripod, light, and microphone equipment must be supplied separately.
Who Should Buy SMALLRIG 4382?
Good fit
Consider the SMALLRIG 4382 if you regularly switch between vertical and horizontal phone video and want to mount the phone alongside camera or tripod equipment.
The dual mounting options can make it easier to fit into a rig that uses either a threaded connection or a cold shoe at the mounting point.
It is also a good fit for creators who want a light or microphone above the phone and need some angle adjustment for interviews, vlogging, or streaming.
Before choosing it, confirm the phone width with its case and check that the total load stays within 500 g.
Its appeal is the combination of orientation changes, adjustable joints, and accessory points in one holder. If those features match the way you film, the 4382 is worth considering as a flexible phone mount.
Who should skip it
Look elsewhere if your phone is outside the 57–88 mm width range or if your phone and planned accessories together exceed the 500 g limit.
This is less suitable if you need a complete filming kit in one package: the included component is the phone holder, not a camera, tripod, microphone, or light.
How the SMALLRIG 4382 Fits a Mobile Video Rig
A mount that works across common rig connections
The bottom offers both a 1/4-inch-20 threaded hole and a cold shoe, giving buyers two ways to connect the holder to a camera or tripod setup.
This makes it useful when moving a phone between compatible gear, though the right option depends on the connection available on the rig.
Portrait and landscape without re-clamping
The 4382 is designed to switch between portrait and landscape, with a lock when rotated 90 degrees.
That is practical for creators who produce both vertical and horizontal video, since changing orientation does not require removing the phone from the clamp.
Joint movement and accessory planning
Two rotary joints support up to 180 degrees of adjustment, which gives the phone more positioning options than a fixed holder.
The top cold shoe can take a light or microphone, while the spaced threaded holes are intended for power bank holders. Keep the 500 g maximum in view when considering the phone and attached gear together.
Check fit before building around the holder
The clamp fits phones 57–88 mm wide. Measure the device with its usual case in place, then consider how its weight and planned accessories compare with the mount's stated load limit.
Since the package contains only the holder, account for the mounting and recording equipment you already own.
Alternatives to SMALLRIG 4382
One relevant alternative is included because the supplied options offer a distinct MagSafe mounting approach; compare its attachment style with the 4382's adjustable clamp before choosing.
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount 5156
Choose the 4382 if you prefer a width-based clamp that accommodates phones across its stated range.
The 5156 may suit an iPhone owner who wants MagSafe attachment and a detachable mounting plate, provided that magnetic fit and the impact-related detachment caveat suit the intended setup.
- The 5156 is designed for iPhones with MagSafe and offers magnetic attachment, dual rotating shafts, a threaded hole or base cold shoe, and a detachable top plate that can serve as a mounting plate.
- Its description notes that external impacts may cause the device to detach.
- The 4382 grips phones 57–88 mm wide and supports a range of phone models, with the mount attaching through a 1/4-inch-20 thread or a base cold shoe.
Is SMALLRIG 4382 Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for mobile creators who want a clamp-based phone mount with portrait and landscape rotation, adjustable joints, and options for attaching it to a camera or tripod.
Its cold shoe and threaded accessory points add flexibility for compact filming setups.
Check phone width with the case on and account for the 500 g maximum before adding gear.
If your phone fits and your filming setup benefits from the adjustable orientation and mounting choices, the 4382 is a practical candidate.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera and tripod phone clamp for creators who want portrait or landscape framing plus a cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide; check the phone's width with its case attached.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the base cold shoe.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.